× Компания Каталог Новости Вакансии Профиль Производители Контакты Доставка Тех.поддержка

SDS5000X Series Digital Storage Oscilloscopes

oscilloscope SDS5104X

Product Overview

SIGLENT’s SDS5000X series Digital Storage Oscilloscopes are available in bandwidths of 1 GHz, 500 MHz and 350 MHz, have a maximum sample rate of 5 GSa/s, maximum record length of 250 Mpts, and display up to 4 analog channels + 16 digital channels mixed signal analysis ability. The SDS5000X series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 110,000 wfm/s (normal mode, up to 480,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator, as well as serial decoding are also features of the SDS5000X. The large 10.1’’ display capacitive touch screen supports multi-touch gestures, with the addition of user-friendly one-button design for most commonly used functions, can greatly improve the operation efficiency of the SDS5000X. It also supports mouse and external keyboard control.


Key Features

  • 1 GHz, 500 MHz, 350 MHz models with real-time sample rate up to 5 GSa/s
  • SPO technology
  • Waveform capture rates up to 110,000 wfm/s (normal mode), and 480,000 wfm/s (sequence mode)
  • Supports 256-level intensity grading and color temperature display modes
  • Record length up to 250 Mpts
  • Digital trigger system
  • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified and Video (HDTV supported). Trigger zone helps to simplify advanced triggering
  • Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B
  • Low background noise, supports 0.5 mV/div to 10 V/div voltage scales
  • Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 100,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
  • History waveform record (History) function, the maximum recorded waveform length is 100,000 frames
  • Automatic measurement function on 39 parameters, supports statistics with histogram, Gating measurement, Math measurement, History measurement and Ref measurement
  • Math function (2 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root), supports math on math
  • Search and Navigate
  • Digital Voltmeter
  • Waveform Histogram
  • High Speed hardware-based Average, Eres (Enhanced Resolution)
  • High Speed hardware-based Mask Test function, with Mask Editor tool for creating user-defned masks
  • 16 digital channels (optional) with maximum waveform capture rate up to 1.25 GSa/s, record length up to 62.5 Mpts
  • 25 MHz function / arbitrary waveform generator, built-in multiple predefned waveforms
  • Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch screen supports multi-touch gestures
  • Supports external mouse and keyboard
  • 10 types of one-button shortcuts
  • Multiple interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11, telnet, socket, web), Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA output
  • Built-in web server supports remote control by the LAN port using a web browser
  • Supports SCPI remote control commands


Design Features

Up to 110,000 wfm/s waveform update rate Record Length of up to 250 Mpts/ch
With a waveform update rate of up to 110,000 wfm/s, the oscilloscope can easily capture unusual or low-probability events. In Sequence mode the waveform capture rate can reach 480,000 wfm/s Using hardware-based Zoom technique and record length of up to 250 Mpts, users can select a slower timebase without compromising the sample rate, and then quickly zoom in to focus on the area of interest
256-level Intensity Grading and Color Temperature Display Multiple Trigger Functions
  Edge, Slope, Pulse, Video, Windows, Runt, Interval, Dropout, Pattern, Qualifed and serial trigger
Trigger Zone Measurements of a Variety of Parameters
Trigger Zone is available for advanced triggering Parameter measurements includes 3 categories: horizontal, vertical and CH delay providing a total of 39 different types of measurements. Measurements can be performed within a specified gate period. Measurements on Math, Reference and History frames are supported
Parameter statistics function Advanced Math Function
Statistics shows the current value, maximum value, minimum value, standard deviation and mean value of up to 5 parameters simultaneously. Histogram is available to show the probability distribution of a parameter. In addition to the traditional (+, -, X, /) operations, FFT, integration, differential and square root operations are supported. Math on math is available for more complex operations
FFT History Mode
Hardware accelerated FFT supports up to 2 Mpts operation. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs. Three modes (Normal, Average and Max hold) can satisfy different requirements for observing the power spectrum History function can record up to 100,000 frames of waveforms. The recording is executed automatically, so that the customer can play back the history waveforms at any time in order to observe unusual events and quickly locate the area of interest using the cursors or measurements
Sequence Mode  Search and Navigate
Segmented memory collection will store the waveform into multiple memory segments (up to 100,000) and each segment will store a triggered waveform as well the dead time information. The dead time between segments can be as small as 2 μs. All of the segments can be played back using the History function The SDS5000X can search events specifed by the user in a frame. Events flagged by the Search can be recalled automatically using Navigate. It can also navigate by time (delay position) and history frames
Hardware-based Average and Eres Acquisition Hardware-based High Speed Mask Test Function
Average and Eres (Enhanced Resolution) acquisition modes are hardwarebased, allowing the waveforms to be captured at a faster rate The SDS5000X utilizes a hardware-based Mask Test function, performing up to 110,000 Pass / Fail decisions each second. It is easy to generate user-defned test templates in order to provide trace mask comparisons, making it suitable for long-term signal monitoring or automated production line testing
  Serial Bus Decode
Built-in Mask Editor application helps to create custom masks Display the decoded characters through the events list. Bus protocol information can be quickly and intuitively displayed in tabular form. I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B are supported
Waveform Histogram Digital Voltmeter Function
The Waveform Histogram feature provides a statistics view of the waveform in horizontal and vertical directions 4-digit voltmeter and 7-digit frequency counter. Any analog channel can be selected as a source. Bar, Histogram and Trend diagrams are supported
Web control Digital Channels / MSO (Optional) 
With the new embedded web server, users can control the oscilloscope from a simple web page. This provides wonderful remote troubleshooting and monitoring capabilities. Four analog channels plus 16 digital channels enable users to acquire and trigger on the waveforms then analyze the pattern, simultaneously with one instrument
Built -in 25 MHz Function/Arbitrary Waveform Generator (Optional)  Complete Connectivity
the SDS5000X can control the SAG1021 USB Function/Arbitrary waveform generator to output waveform with up to 25 MHz frequency and ±3 V amplitude. Six basic waveforms plus multiple types of arbitrary waveforms are built-in USB Host, USB Device (USBTMC), LAN (VXI-11, telnet, socket, web), Pass/Fail, Trigger Out, 10 MHz In/Out and VGA output

Ordering Information

Mode Description
SDS5104X 1 GHz, 4 CH, 5 GSa/s (Max.)
SDS5102X 1 GHz, 2 CH, 5 GSa/s (Max.)
SDS5054X 500 MHz, 4 CH, 5 GSa/s (Max.)
SDS5052X 500 MHz, 2 CH, 5 GSa/s (Max.)
SDS5034X 350 MHz, 4 CH, 5 GSa/s (Max.)
SDS5032X 350 MHz, 2 CH, 5 GSa/s (Max.)
Standard Accessories
USB cable x1
Quick start x1
Passive probe x2 (2-ch model); x4 (4-ch model), SP2035A for 350 MHz models and SP3050A for 500 MHz / 1 GHz models
Certifcate of calibration x1
Power cord x1
Optional Accessories
SDS-5000X-4BW05 350 MHz to 500 MHz bandwidth upgrade (4-ch model) *
SDS-5000X-2BW05 350 MHz to 500 MHz bandwidth upgrade (2-ch model) *
SDS-5000X-4BW10 500 MHz to 1 GHz bandwidth upgrade (4-ch model)
SDS-5000X-2BW10 500 MHz to 1 GHz bandwidth upgrade (2-ch model)
SDS-5000X-FG Waveform generator software
SAG1021 25 MHz USB function/arbitrary waveform generator
SDS-5000X-16LA 16 digital channels (software)
SPL2016 16-channel logic probe
SDS-5000X-I2S I2S trigger & decode
SDS-5000X-CANFD CAN FD trigger & decode
SDS-5000X-FlexRay FlexRay trigger & decode
SDS-5000X-1553B MIL-STD-1553B trigger & decode
STB3 STB3 demo signal source
SAP1000 1 GHz active probe
HPB4010 High voltage probe
CP4020/CP4050/CP4070/ CP4070A/CP5030/ CP5030A/CP5150/CP5500 Current probe
DPB4080/DPB5150/ DPB5150A/DPB5700/ DPB5700A High voltage differential probe

* SDS5034X/SDS5032X cannot be upgraded to SDS5104X/SDS5102X

Название Полоса пропускания Количество каналов Частота дискретизации Память Дисплей Цена, грн
350 МГц 2 5 Гв/c 250М 10.1'', 1024 x 600 95160.6
350 МГц 4 5 Гв/c 250М 10.1'', 1024 x 600 117146
500 МГц 2 5 Гв/c 250М 10.1'', 1024 x 600 173586
500 МГц 4 5 Гв/c 250М 10.1'', 1024 x 600 186712
1 ГГц 2 5 Гв/c 250М 10.1'', 1024 x 600 196884
1 ГГц 4 5 Гв/c 250М 10.1'', 1024 x 600 239542
Название Тип Описание Цена, грн
Опция Upgrade 350 MHz to 500 MHz (2-CH model),350 MHz model can not be upgraded to 1 GHz,software license 106646
Опция Upgrade 350 MHz to 500 MHz (4-CH model);350 MHz model can not be upgraded to 1 GHz,software license 110911
Опция Upgrade 500MHz to 1 GHz (2-CH model),software license 52502.4
Опция Upgrade 500MHz to 1 GHz (4-CH model),software license 78753.6
Опция 25 MHz USB Function/Arbitrary Waveform Generator (Software) 9844.2
Акссесуар 25 MHz USB function/arbitrary waveform generator 5250.24
Опция 16 digital channels (software) 13781.9
Акссесуар Логический пробник, 16 каналов, 500 Мв/с 12141.2
Опция I2S trigger & decode 10664.5
Опция CAN FD trigger & decode 10664.5
Опция FlexRay trigger & decode 10664.5
Опция MIL-STD-1553B trigger & decode 10664.5
Акссесуар 32814
Наименование Дата Размер Загрузка
SDS5000X Introduction 07.02.2019 5MB Скачать
SDS5000X Series DataSheet 07.02.2019 5MB Скачать
SDS5000X Series QuickStart 07.02.2019 9MB Скачать
SDS5000X Series Digital Oscilloscope Introduction
SDS5000X Feature Highlights Part 1
SDS5000X Feature Highlights Part 2