SDS2000X HD серія осцилографів

12-bit High Resolution

12-bit resolution shows you more details and less noise on the waveform.

Low noise floor: Only 70 µVrms at 500 MHz bandwidth.

0.5% DC gain accuracy.

High Waveform Update Rate

With a waveform update rate of up to 100,000 wfm/s, the oscilloscope can easily capture unusual or low-probability events. In Sequence mode, the waveform capture rate can reach 500,000 wfm/s.

Deep Record Length

Using hardware-based Zoom technique and record length of up
to 200 Mpts, users can select a slower timebase without
compromising the sample rate, and then quickly zoom in to
focus on the area of interest

Multiple Trigger Functions

Edge, Slope, Pulse, Video, Windows, Runt, Interval, Dropout,
Pattern

Trigger Zone

Trigger Zone is available for advanced triggering

Advanced Math Function

In addition to the traditional (+, -, X, /) operations, FFT, integration, differential, square root, and more are supported. Formula Editor is available for more complex operations. 2 math traces are available.

Hardware-accelerated FFT supports up to 2 Mpts operation. This provides high-frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs. Three modes (Normal, Average, and Max hold) can satisfy different requirements for observing the power spectrum. Auto peak detection and markers are supported.

Measurements of a Variety of Parameters

Parameter measurements include 4 categories: horizontal, vertical, miscellaneous, and CH delay providing a total of 50+ different types of measurements. Measurements can be performed within a specified gate period. Measurements on Math, Reference, and History frames are supported

Parameter Statistics Function

Statistics show the current value, maximum value, minimum value, standard deviation, and mean value of up to 12 parameters simultaneously. A histogram is available to show the probability distribution of a parameter. Trend and Track are available to show the parameter value vs. time.

For horizontal parameters such as period, all results are extracted from a frame, instead of just calculating the first one. This accelerates statistics on horizontal measurements much more and enables distribution observation in a frame using Histogram and Track

History Mode

History function can record up to 80,000 frames of waveforms. The recording is executed automatically so that the customer can playback the history waveforms at any time to observe unusual events and quickly locate the area of interest using the cursors or measurements. The failed frames of the Mask Test can be stored as history

Sequence Mode

Segmented memory collection will store the waveform into multiple memory segments (up to 80,000) and each segment will store a triggered waveform as well the dead time information. The interval between segments can be as small as 2 μs. All of the segments can be played back using the History function

Search and Navigate

The oscilloscope can search events specified by the user in a frame. Events flagged by the Search can be recalled automatically using Navigate. It can also navigate by time (delay position) and history frames

Serial Bus Decode

Display the decoded characters through the events list. Bus protocol information can be quickly and intuitively displayed in tabular form. I²C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I²S, MIL-STD-1553B, SENT, and Manchester are supported

Hardware-based High-Speed Mask Test Function

The oscilloscope utilizes a hardware-based Mask Test function, performing up to 14,000 Pass / Fail decisions each second. It is easy to generate user-defined test templates to provide trace mask comparisons, making it suitable for long-term signal monitoring or automated production line testing

Bode Plot

The oscilloscope can control the built-in waveform generator or a stand-alone SIGLENT generator, to scan the amplitude and phase-frequency response of the DUT, and display the data as a Bode Plot. This makes it possible to replace expensive network analyzers in some applications

Power Analysis (Optional)

The Power Analysis option provides a full suite of power measurements and analysis, which greatly improve the measurement efficiency in switching power supplies and power devices design

Digital Channels / MSO (Optional)

Four analog channels plus 16 digital channels enable users to acquire and trigger the waveforms then analyze the pattern, simultaneously with one instrument

Built-in 25 MHz Waveform Generator (Optional)

The built-in waveform generator can output waveforms with up to 25 MHz frequency and ±3 V amplitude. Six basic waveforms together with multiple types of predefined waveforms and as user-defined arbitrary waveforms are supported

Complete Connectivity

USB Host 2.0 x3, USB Device 2.0 (USBTMC) , LAN (VXI-11/Telnet/Socket), Auxiliary output (Pass/Fail, Trigger Out), etc

USB Cable

Standard USB cable.

Wireless Mouse

Power Cord

Proper cord for country of operation

Quick start-SDS2000X HD

Certificate of calibration

SP5050A

Passive probe ( 500 MHz)

SDS2000HD-PA

Power Analysis (software)

Current Probes

Measure current with your oscilloscope

High Voltage Differential Probe

Measure floating circuits/three phase systems

DF2001A

Power analysis deskew fixture.

HPB4010

High voltage probe

SDS2000HD-FG

Waveform generator (software)

SDS2000HD-16LA

MSO activation license for SDS2000X HD oscilloscopes

SPL2016

Logic Probe hardware kit

SDS2000HD-I2S

I2S trigger & decode (software)

SDS2000HD-1553B

MIL-STD-1553B trigger & decode (software)

SDS2000HD-FlexRay

FlexRay trigger & decode (software)

SDS2000HD-CANFD

CAN FD trigger & decode (software)

SDS2000HD-SENT

SENT trigger & decode (software)

SDS2000HD-Manch

Manchester decode (software)

100 MHz to 200 MHz bandwidth upgrade

100 MHz to 200 MHz bandwidth upgrade (software)

100 MHz to 350 MHz bandwidth upgrade

100 MHz to 350 MHz bandwidth upgrade (software)

100 MHz to 500 MHz bandwidth upgrade

100 MHz to 500 MHz bandwidth upgrade (software)

200 MHz to 350 MHz bandwidth upgrade

200 MHz to 350 MHz bandwidth upgrade (software)

200 MHz to 500 MHz bandwidth upgrade

200 MHz to 500 MHz bandwidth upgrade (software)

350 MHz to 500 MHz bandwidth upgrade

350 MHz to 500 MHz bandwidth upgrade (software)

BAG-S2

Soft Carry Bag

Learn more

STB-3

Oscilloscope Demonstration Board