SEA Company supplies soldering equipment to Ukraine, smoke removal systems, hand power tools, as well as technological materials for soldering.
The soldering equipment supplied by SEA company is intended both for automatic installation (devices for applying solder paste and glue, component installers, soldering melting furnaces, soldering wave soldering equipment, soldering baths) and for manual installation (soldering and repair stations, gas soldering irons, air purification systems, board heaters, minitigels for tinning conductors, board holders).
SEA Company distributes professional soldering equipment as a supplier of Weller products (Germany). Such equipment is designed for professional installers who use soldering and repair stations when assembling or repairing modern high-tech electronic equipment in industrial production, laboratory conditions and service centres, and for radio amateurs.
Also, SEA Company supplies technological materials for soldering (solders, fluxes, solder pastes, protective masks, activators for stings, braids for removing solder, sponges for cleaning soldering iron tips, etc.) as for example one of the world's leading manufacturers - Interflux (Belgium), and less known, but more affordable - Ku Ping (Taiwan).
| Part Number | Device type/Specifications | Quantity in stock, pcs | Request |
Interflux Electronics N.V |
|||
| DP 5505 | No-clean solder paste Sn96.5Ag3Cu0.5, type 3, 88.5%, 25-45mk, 500g | <50 |  |
| IF2009M | Flux water-soluble, No clean, VOC Free, 500 ml | >150 | |
| IF8300 | Flux gel for BGA soldering and reballing, 30 cc | <50 | |
| Sn95,5Ag3,8Cu0,7, 0,7mm | Solder IF14-16, flux no clean 1.6%, 500 g | <50 | |
| Sn95,5Ag3,8Cu0,7, 1,0mm | Solder IF14-16, flux no clean 1.6%, 500 g | >50 | |
| Solder pellets Sn99,3Cu0,7 | 1cm x 1cm, no flux, for tinning, 1kg | <50 | |
Weller |
|||
| DXV 80 | Straight thermopump with replaceable cartridges (without stand), 80 W, 24 V | <50 | |
| LT BB | Elongated conical tip, truncated at 60*, width 2.4mm, thickness 4mm, (WP80, WSP80, WSP80IG, WSP80FE, FE75, MPR80) | <50 | |
| LT CC | Elongated conical tip, truncated at 60*, width 3.2mm, thickness 6mm, (WP80, WSP80, WSP80IG, WSP80FE, FE75, MPR80) | >100 | |
Oglesby & Butler Ltd. (Portasol) |
|||
| SP-1 | Gas soldering iron (25-125W), piezo ignition, 3 operating modes | <50 | |
Ku Ping Enterprise Co., Ltd. |
|||
| Sn63Pb37, 0,5mm | Solder, flux No clean 1.1%, 500 g | >100 | |
| Sn63Pb37, 0,8mm | Solder, flux No clean 2%, 500 g | >1000 | |
| Sn63Pb37, 1,6mm | Solder, flux No clean 2%, 500 g | <50 | |
| Sn99,3Cu0,7, 0,8mm | Solder, flux No clean 2%, 500 g | >200 | |
| Sn99,3Cu0,7, 1,0mm | Solder, flux No clean 1.1%, 500 g | >350 | |
| Sn99,3Cu0,7, 1,0mm | Solder, without flux, 500 g | >100 | |
| Sn99,3Cu0,7, 1,6mm | Solder, flux No clean 2%, 500 g | >300 | |
For additional information and regarding the purchasing of gas soldering irons and other soldering devices, instruments and materials, please contact SEA Company by phone +380 (44) 330-00-88 or via e-mail info@sea.com.ua.