SDS1000X-E серія осцилографів

SDS1204X-E SDS1104X-E SDS1202X-E

Product Overview SDS1204X-E SDS1104X-E SDS1202X-E

SIGLENT’s new SDS1000X-E Series Super Phosphor Oscilloscope is available in 100 and 200 MHz bandwidths and 2 or 4 analog channels. It has a maximum sample rate of 1 GSa/s and a standard record length of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.The SDS1000X-E series employs a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode).

The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. SIGLENT’s latest oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Serial decoding is free and includes IIC, SPI, UART, CAN, and LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1 Mpt FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and performance of SIGLENT’s new SDS1000X-E cannot be matched anywhere else in this price class.

	Bandwidth	Channels	Real time sampling rate	Capture rate	Memory depth
SDS1204X-E	200 MHz	4	1 GSa/s	100000 wfm/s (Normal Mode) 400000 wfm/s (Sequence mode	7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode)
SDS1104X-E	100 MHz	4	1 GSa/s	100000 wfm/s (Normal Mode) 400000 wfm/s (Sequence mode	7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode)
SDS1202X-E	200 MHz	2+EXT	1 GSa/s	100000 wfm/s (Normal Mode) 400000 wfm/s (Sequence mode	7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode)

Key Features SDS1204X-E SDS1104X-E SDS1202X-E

Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Timeout (Dropout), and Pattern
Free Serial bus triggering and decoding:IIC, SPI, UART, RS232, CAN, and LIN
Video triggers and supports HDTV
Low background noise and 500 μV / div to 10 V / div voltage scales
10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event.
History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
Automatic measurement function on 38 parameters, supports Statistics, Gating measurement, Math measurement, History measurement and Ref measurement
1 Mpts FFT
True measurement and math can use all 14 Mpts of memory
Preset key can be customized for user settings or factory “defaults”
Security Erase mode
Highspeed hardware based Pass/ Fail function
Large 7-inch TFT-LCD display with 800 * 480 resolution
Multiple interface types: USB Host, USB Device (USB-TMC), LAN (VXI-11), Pass / Fail, Trigger Out
Supports SCPI remote control commands
Multi-language display and embedded help
Browser control/onboard webpage for software free monitoring (4 channel models only)
Bode plotting function controls external generator (SIGLENT SDG or SAG generators, 4 channel models only)


7 Inch TFT-LCD Display and 10 One-button Menus 7-inch TFT-LCD display with 800*480 resolution Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursor, Measure, Roll, History, Persist, Clear Sweep, Zoom, and Print	Record Length of Up to 14 Mpts Using hardware-based Zoom technologies and record length of up to 14 Mpts, users are able to use a higher sampling rate to capture more of the signal and then quickly zoom in to focus on the area of interest.	Waveform Capture Rate Up to 400,000 wfm/s With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture low-probability events.

256-Level Intensity Grading Events that occur more frequently are brighter (intensity grading) than events that occur less often. This allows you to quickly identify spurious signals.	Color Temperature Grading Event frequency is shown using different colors (temperature grading). Frequent events are warmer the color. This helps to easily identify rare events.	Serial Bus Decoding Function (Standard) SDS1000X-E displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in tabular format.

True Measurements on all data At any one timebase, the SDS1000X-E can measure using all 14M sample points. This ensures the accuracy of measurements while the math co-processor decreases measurement time and increases ease-of-use.	History Waveforms (History) Mode and Segmented Acquisition (Sequence) Playback the latest triggered events using the history function. Segmented memory zcquisition will store the waveform into multiple (up to 80,000) memory segments, each segment will store triggered waveforms and timestamp each frame.	Gate and Zoom Measurement Through Gate and Zoom measurement, the user can specify an arbitrary interval of waveform data analysis and statistics. This helps avoid measurement errors that can be caused by invalid or extraneous data, greatly enhancing the measurements’ validity and flexibility.

1 Mpt FFT The new math co-processor enables FFT analysis of incoming signals using up to 1M samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectral measurement needs	High Speed Hardware-Based Pass/Fail Function The SDS1000X-E utilizes a hardware-based Pass/Fail function, performing up to 40,000 Pass / Fail decisions each second. Easily generate userdefined test templates provide trace mask comparison making it suitable for long-term signal monitoring or automated production line testing.	Customizable Default Key The current parameters of oscilloscope can be preset to Default Key through the Save menu.

Complete Connectivity SDS1000X-E supports USB Host, USB Device (USB-TMC), LAN (VXI-11), WiFi (optional, 4 channel models only), Pass/Fail and Trigger Out.

Standard Accessories SDS1204X-E SDS1104X-E SDS1202X-E

Power Cord

Proper cord for country of operation

Learn more

USB Cable

Standard USB cable.

Learn more

Probes

Qty 1 per analog channel

Learn more

Quick Start Guide-SDS1KX-E

Printed Quick Start Guide (English)

Learn more

Optional Accessories SDS1204X-E SDS1104X-E SDS1202X-E


SDS1000X-E-FG Unlocks external function generator control for the SDS1X-E oscilloscope series. Requires SAG hardware for operation. Learn more	SLA1016 Mixed Signal hardware option for 4 channel X-E scopes Learn more	SDS1000X-E-16LA MSO activation license for SDS1000X-E four channel series only Learn more	TL_WN725N USB Wi-Fi Adapter

SDS1000X-E-WIFI WiFi activation license for SDS1000X-E four channel series only	Current Probes Measure current with your oscilloscope Learn more	10 kV High Voltage Probe 40 MHz passive probe for high voltages Learn more	High Voltage Differential Probe Measure floating circuits/three phase systems Learn more

STB-3 Oscilloscope Demonstration Board Learn more	SDS1000X-E/SDS1000X-U-RMK Rack Mount Kit, compatible with SDS1000X-E/SDS1000X-U models. 4U rack height. Learn more	SAG1021I External Arbitrary Waveform Generator Learn more	BAG-S1 Soft Carry Bag Learn more

Все цены указаны с НДС, подлежат пересмотру при обработке заказа и могут корректироваться дополнительными пошлинами, тарифам или надбавками.

Название	Bandwidth	Channels	Real time sampling rate	Memory depth	Vertical Resolution	Цена, грн
SDS1202X-E	200 MHz	2	1 GSa/s	14 Mpts	8bit	18719.57
SDS1104X-E	100 MHz	4	1 GSa/s	14 Mpts	8bit	24646.61
SDS1204X-E	200 MHz	4	1 GSa/s	14 Mpts	8bit	37488.53

Наименование	Дата	Размер	Загрузка
SDS1000X-E_Series_Datasheet	03.05.2024	3MB	Скачать
Programming_Guide_For_SDS1000X-E_Serie	03.05.2024	1MB	Скачать
SIGLENT_Probe_Datasheet	03.05.2024	2MB	Скачать
SDS1000X-E_Series_Quick_Start	03.05.2024	4MB	Скачать
SDS1000X-E_Series_User_Manual	03.05.2024	4MB	Скачать
Standard_Probe_Listing	03.05.2024	375kB	Скачать

Минимальная сумма заказа - {{ item.direction.min_price }} грн. Все цены указаны с НДС.

Наименование	К-во	Цена/шт.
{{ product.name }} {{ product.remark }}	шт.	{{ product.price_with_tax }}

ИТОГО: {{ item.total_with_tax }}

Ваша корзина пуста.

Продолжить покупки Оформить заказ

Название	Описание	К-во
{{ product.name }}	{{ product.remark }}

Продолжить покупки

Название	Описание	К-во
{{ product.name }}	{{ product.remark }}

Отмена

Top

SDS1000X-E серія осцилографів

Product Overview SDS1204X-E SDS1104X-E SDS1202X-E

Key Features SDS1204X-E SDS1104X-E SDS1202X-E

7 Inch TFT-LCD Display and 10 One-button Menus

Record Length of Up to 14 Mpts

Waveform Capture Rate Up to 400,000 wfm/s

256-Level Intensity Grading

Color Temperature Grading

Serial Bus Decoding Function (Standard)

True Measurements on all data

History Waveforms (History) Mode and Segmented Acquisition (Sequence)

Gate and Zoom Measurement

1 Mpt FFT

High Speed Hardware-Based Pass/Fail Function

Customizable Default Key

Complete Connectivity

Standard Accessories SDS1204X-E SDS1104X-E SDS1202X-E

Power Cord

USB Cable

Probes

Quick Start Guide-SDS1KX-E

Optional Accessories SDS1204X-E SDS1104X-E SDS1202X-E

SDS1000X-E-FG

SLA1016

SDS1000X-E-16LA

TL_WN725N

SDS1000X-E-WIFI

Current Probes

10 kV High Voltage Probe

High Voltage Differential Probe

STB-3

SDS1000X-E/SDS1000X-U-RMK

SAG1021I

BAG-S1